Truck Diesel Parts - BEST Performance for Ford Powerstroke, Dodge Cummins and Chevy Duramax
Diesel Performance Parts
ScooterForumOnline | Scooter Forum | Motor Scooter Forum --- Please Post All Questions Here (Moderators: admin, Sparky) | License Plate Bracket?
Pages: [1]   Go Down
« previous next »
Print
Author Topic: License Plate Bracket?  (Read 759 times)
0 Members and 1 Guest are viewing this topic.
Iron Mike
Scooter Forum Friend
**

Karma: 0
Offline Offline

Posts: 26


View Profile
« on: July 16, 2006, 05:24:41 AM »
Ok...so this is probably a stupid question, but it there supposed to be a bracket to hold the license plate on the Touring 150?  The hole pattern in the rear fender won't match the license plate.   Did all of you make your own or did it come with one?
Logged
ScooterForumOnline
« on: July 16, 2006, 05:24:41 AM »
 Logged
Sparky
Global Moderator
Scooter Forum Guru
*****

Karma: 6
Offline Offline

Posts: 1,366



View Profile
« Reply #1 on: July 16, 2006, 09:03:05 AM »
Sorry, there is no bracket to adapt the holes. You either have to drill new holes in the plate, (which is what I did) or in the fender.
It's legal to drill the plate, as long as you don't obscure or damage the info. on it.
A piece of aluminum flat stock, 3/4" wide & as long as the width of the plate will do as an adapter, if you want to drill 4 holes in it to match the fender, and plate holes.
Logged
Sparky
Master Mechanic, Electrician,
Tank Urban Touring 250 DE owner


"Great spirits have always encountered violent opposition from mediocre minds."

"Without Deviation from the Norm, Progress is not Possible."
ScooterForumOnline
« Reply #1 on: July 16, 2006, 09:03:05 AM »
 Logged
Iron Mike
Scooter Forum Friend
**

Karma: 0
Offline Offline

Posts: 26


View Profile
« Reply #2 on: July 16, 2006, 11:54:56 AM »
Drilling new holes in the license plate was so obvious.  I didn't think it was legal.  I suppose I could fabricate a bracket, but 2 new holes in the plates works just as well.
Logged
ScooterForumOnline
« Reply #2 on: July 16, 2006, 11:54:56 AM »
 Logged
AndrewW
Newbie
*

Karma: 0
Offline Offline

Posts: 8


View Profile
« Reply #3 on: July 25, 2006, 08:25:31 AM »
i took the bracket from my "trunk" and fabed a plate bracket.
I broke my "trunk" 3 days into haveing scooter. Even before i got my licence plate actually. When i got to my place Quikly Found it wouldnt Fit... So i swapped the bracket.
Logged
ScooterForumOnline
« Reply #3 on: July 25, 2006, 08:25:31 AM »
 Logged
Pages: [1]   Go Up
Print
« previous next »
Jump to: